On my 23 the high mounted rear camera would stop working the screen just showed lines, if I unplugged the rear camera from the booster in the 12 bath and replugged it would come back on. The diagnosis was bad rear camera and replace the camera wire to the 1/2 bath. Unfortunately a lot of rear...
You are correct in the wire connection and checking it, I’m talking about the the control side that tells the camera to activate IE: activating the turn signals or shifting in reverse. To your point if it’s unplugged or camera failed , nothing will help under the dash
BTW this was not something that I did on mine, maybe a few times in a pinch, however I believe the selling dealer may have done this
I know some people do this while traveling at truck stops for a break
When I asked HWH they said they didn’t know why it failed, my tech at HWH thought that Newmar’s were upgraded with a metal sleeve around the revolver because of the weight of the slide room. This turned out to be incorrect
Maybe you will learn more, can’t weight to hear
The synchronizer cylinder that can’t always equalize the pressures created when the travel is reversed in mid travel. This was my understanding of what was said
I had a full wall slide failure on my 23 DS and I Have been helping Rustycoach with his 20 DS
It turns out he had the same failure as mine. There is a part referred to as the Revolver gear, it’s a plastic wheel that has pins in it ( looks like a revolver with bullets)
This seems to be happening...
In mine they sent the entire “arm” the part that bolts in at the top to the wall and the floor. Included cylinder, chains, rack etc. I think HWH has the ability to goodwill, maybe if you’re doing the labor that will sway them. Good luck. Ask for a new arm assembly
Unfortunately this hardly ever happened but in the later years it’s happening mine was a 23
One thing that came up from Newmar, you should never partially bring the room out and then bring it back in. They say that this creates undue pressure on the slide mechanisms.
I’m not positive on your NA but if you think about it the left and right view of the lanes when turn signals are operating are not part of the 360 camera view. On my 2018 DS there was a separate module under the dash for the two turn cameras and the rear lower camera. I didn’t like the redundant...
The ideal thing would be to have a piece of solid surface countertop made, it’s not very big.
The problem is that with the laminate not going down and under the sink, this will keep happening.
Your are at a point where you have done the hardest part and you have the existing counter to use as a...
I concur:
Stuart W
RVF Supporter
JoinedNov 2, 2019Messages376RV Year2025RV MakeEntegraRV ModelCornerstoneRV Length45ChassisFLEngineCumminsTOW/TOADJeep Wrangler
Yesterday at 7:59 AM
Add bookmark
#14 of 31
I don’t think they missed a spot, the issue is they are essentially gluing the sink...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.