While my new to me 2000 Lance 1010 is unloaded I noticed a 10" X 10" metal cover near the drivers side front which when removed gives access to the fresh water holding tank connections. Farther to the rear on the same side there is a 6" X 6" metal cover plate which with the screws out did not want to come off due to being sealed very well. Not wanting to force anything, I was curious if someone could tell me what it would give access to. Thanks in advance..
Welcome to RVForums.com
- Register now and join the discussion
- Friendliest RV Community on the web
- Modern site for PC's, Phones, Tablets - no 3rd party apps required
- Ask questions, help others, review campgrounds
- Get the most out of the RV Lifestyle
- Invite everyone to RVForums.com and let's have fun
- Commercial/Vendors welcome
2000 Lance 1010 access panels on bottom of camper?
- Thread starter L1010TC
- Start date
Welcome to RVForums.com
- Register now and join the discussion
- Modern secure site, no 3rd party apps required
- Invite your friends and let's have fun
- Commercial/Vendors welcome
- Friendliest RV community on the web
Similar threads
Share this page
Latest posts
-
How long do you leave water in your fresh water tank?- Latest: CaptainGizmo
-
-
-
-
Latest resources
-
-
Trueline Leveling System (Valid Air)Operation & Service Manuals for the Valid Air leveling system
- Jim
- Updated:
-
-
Notes on the Electrical Systems of the Roadtrek Zion Family of RVsNotes on the Electrical Systems of the Roadtrek Zion Family of RVs
- dilbertjth
- Updated:
-
