Joe Hogan
RVF Supporter
- Joined
- Nov 3, 2019
- Messages
- 3,261
- Location
- Florida
- RV Year
- 2024
- RV Make
- Newmar
- RV Model
- Dutch Star 4311
- RV Length
- 43
- Chassis
- Spartan
- Engine
- Cummins
- TOW/TOAD
- 2018 Ford Flex
- Fulltimer
- No
Noticed on the last few trips that when leaving a rest stop the Cruise control will not activate until the brake is pressed at speed? Typically when leaving a rest stop I use the engine brake to maintain/adjust speed until on the highway. I've noticed that the cruise control will not activate after a start until the brake pedal is pressed at speed.
It is a bit annoying but now that I've discovered this it is a non issue.
A bit bizarre but I've learned that the brake switch on this model has a less than optimal location. The 2025 model has been charged due to these issues.
It is a bit annoying but now that I've discovered this it is a non issue.
A bit bizarre but I've learned that the brake switch on this model has a less than optimal location. The 2025 model has been charged due to these issues.
