wardejii
RVF Supporter
- Joined
- Sep 5, 2020
- Messages
- 24
I started this project months ago, demo it, cleaned and painted frame.
Took frame in, new bearings, coupler, chains.
They could not locate outside grease seals so put a brand new axle under it. (Peace of mind )
Finally got it back and excited to get started on rebuild.
Going to insulate floor, anyone have any suggestions.
——————————————————————
MY THOUGHTS - Rim outside of plywood with 5/4” board, planned to 1” and cut into 1”-1 1/2” strips. Also horizontally to support plywood.
Use 1” styrofoam insulation and cover with either 1/2” osb or 1/2” cdx plywood.
Let the good times roll.
Took frame in, new bearings, coupler, chains.
They could not locate outside grease seals so put a brand new axle under it. (Peace of mind )
Finally got it back and excited to get started on rebuild.
Going to insulate floor, anyone have any suggestions.
——————————————————————
MY THOUGHTS - Rim outside of plywood with 5/4” board, planned to 1” and cut into 1”-1 1/2” strips. Also horizontally to support plywood.
Use 1” styrofoam insulation and cover with either 1/2” osb or 1/2” cdx plywood.
Let the good times roll.