Question Omni View 360 Issue

[DennisT]

Question for those with the OmniView 360 system.

When leaving Florida the only camera angle I can get is the rear horizon. Turn signal cameras do come on when I change lanes as they should.

No option to change the view to the 360 or any of the other cameras that are part of the 360 system.

System has been rebooting itself periodically and the 360 camera view was causing static through the speakers on the way south as well as static on the screen so I belive it is power related.

Have done a factory reset, removed and restored power to the main power box as well as the camera booster box.

Have reached out to Newmar to get the location of the 360 box where the cameras all connect (based on recommendation from River Park) as well as a how to on pulling the head unit out of the dash so I can check all the connections on the back.

It is on our warranty list for a trip to the factory in June but would be nice to have the 360 working again during the rest of the trip north.

If anyone has info on the two questions above while I await a response back from Newmar that would be great.

Will keep everyone posted as to the progress of the checks / testing.

 

[Neemer]

Dennis, I can’t say for sure where your box is located, but my DS’ is located on top of a bird’s nest of wiring under the removable part of the dash over the camera monitor and radio.

 

[DennisT]

Yeah, I believe it is above the driver seat behind a cabinet. Saw it last year while they were working on the system.

Don’t mind taking things apart but waiting on the confirmation so I don’t have to take apart any more than needed