I am still looking for an exact replacement but until then I made a sleeve to go around the 3/4" new barrel. I bought a steel bushing id 5/8" od 7/8". I then used a 3/4"drill bit to bore the id to 3/4". I placed it over the 3/4" barrel, put it in a vise and squeezed the bushing around the new barrel. I think it will work. I just need to get the right length barrel.
Welcome to RVForums.com
- Register now and join the discussion
- Friendliest RV Community on the web
- Modern site for PC's, Phones, Tablets - no 3rd party apps required
- Ask questions, help others, review campgrounds
- Get the most out of the RV Lifestyle
- Invite everyone to RVForums.com and let's have fun
- Commercial/Vendors welcome
02 Sunstar 21' motorhome VW
- Thread starter fluidray
- Start date
Welcome to our community
- Register now and join the discussion
- Modern secure site, no 3rd party apps required
- Invite your friends and let's have fun
- Commercial/Vendors welcome
- Friendliest RV community on the web
Share this page
Latest posts
-
-
Rally Oregon Explorers Chapter Rally - April 26-30, 2026- Latest: MarkMaxPayne
-
Latest resources
-
-
Trueline Leveling System (Valid Air)Operation & Service Manuals for the Valid Air leveling system
- Jim
- Updated:
-
-
Notes on the Electrical Systems of the Roadtrek Zion Family of RVsNotes on the Electrical Systems of the Roadtrek Zion Family of RVs
- dilbertjth
- Updated:
-
