I have a 2010 Allegro Bus 43QCP. I had the switches in the stairwell 12V electric disconnect panel replaced because they would not light up and now when the 12V disconnect is turned on, all lights are the panel come on. There are two separate lights on most the switches (one for the running lights and one to indicate the switch is on). Before the replacement, the running lights come when the headlights are turned on. Now, the "running" lights come on when the 12V disconnect is engaged even when the headlights are off. I think the repair technician incorrectly wired the switches. Tiffin has given me conflicting answers on how it is supposed to work. Does anyone have any guidance on this?