Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Help with Thermostat installation!!!!

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

TravisT0111

RVF Newbee
Joined
Aug 16, 2020
Messages
2
Hey all!! I have a Dometic Duo Therm Brisk Air 2, with a failed analog thermostat. I am attempting to replace it with an analog Coleman Mach 7330G3351. The wire colors on the Tstat are exactly the same as what's coming out of the wall, but color to color, the AC will not operate, I get nothing but a fast clicking from the Tstat. Can anyone please help?
 
1599660095848.png
Is this what you took out?
1599660198248.png
Is this what you are installing? The difference I see is the green and blue are switched from one to the other. In other words the original green needs to go to the blue terminal on the new t'stat and the original blue goes to the green terminal on the new one. Make sure that I have the correct pictures due to the possibility of causing more and bigger issues by following my advice........
 

Latest resources

Back
Top