- Joined
- Nov 3, 2019
- Messages
- 2,626
- RV Year
- 2022
- RV Make
- Newmar
- RV Model
- London Aire 4551
- RV Length
- 45
- Chassis
- Spartan
- TOW/TOAD
- 2020 Jeep Wrangler Unlimited Rubicon
My 2019 DSDP has the power MCD shades.
I am trying to set the limits on the front shade, using the instruction I found here:
I am starting with Step 1, correctly pairing it, and then moving on to Step 2.
Step 2 works properly, so I move to step 3. I am trying to set the upper limit, and I go thru the steps. After I get the beeps and jog, I am supposed to be done.
I also found this document, that has a different procedure:
New 15-Channel Remote Programming (July 2017)
This fails too. The only difference I can spot is pressing the stop button 5 times vs pressing and holding the stop button. Both produce the beeps and jog as indicated.
The limits are ignored. What am I doing wrong?
I am trying to set the limits on the front shade, using the instruction I found here:
I am starting with Step 1, correctly pairing it, and then moving on to Step 2.
Step 2 works properly, so I move to step 3. I am trying to set the upper limit, and I go thru the steps. After I get the beeps and jog, I am supposed to be done.
I also found this document, that has a different procedure:
New 15-Channel Remote Programming (July 2017)
This fails too. The only difference I can spot is pressing the stop button 5 times vs pressing and holding the stop button. Both produce the beeps and jog as indicated.
The limits are ignored. What am I doing wrong?
