Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Melt on surge protector

Welcome to our community

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

jagpot

RVF VIP
Joined
Nov 17, 2020
Messages
296
Location
California
RV Year
2014
RV Make
Newmar
RV Model
King Aire
RV Length
45
Chassis
Spartan
Engine
Cummins
TOW/TOAD
Jeep Wr Sahara
Fulltimer
No
I have a watchdog search protector and noticed that there was a slightly melted side on the shore side. Electrically it checks out fine the green lights all still come on. Does that mean that it picked up a surge on the shore side and it did its job? Do you suggest getting another one? It seems to work fine.
 
If it stopped a surge, the surge module would be used up and you would have the appropriate error. More likely is you had a bad connection and a medium to high load and the plug got too hot and cooked it. could have been corrosion or debris on either the male or female side of the connection. A photo would be helpful to show the damage.
 
So many of the receptacles in RV parks can become corroded and even a slight corrosion can cause "arcing" which can literally melt the prongs on your cord. Also just normal use can cause loosening.

Over time, the brass prongs inside park receptacles become worn or loose. Loose contact creates air gaps, causing electricity to "arc" across the gap, generating extreme heat that melts the plastic plug and even the metal prongs.

Also oxide layer build-up, rust, dirt, or moisture on either the plug's prongs or the outlet's slots increases resistance, leading to rapid heat accumulation under heavy loads.

It's a good idea to apply a thin layer of electrical contact grease to prongs to prevent oxidation and moisture buildup.
 
not sure how long you’ve had it but I believe warranty is either 5 years or lifetime. Might be worth a call
 
I’m working with my Bull Dog protector now. Bought on Amazon in 2022. Contacted the company. It has a limited lifetime warranty. They are sending me a replacement. Not sure if it’s a new board or complete unit.

When I called a live person answered the phone. After a couple of questions and an email asking some details they ware sending me what I need. The Park I’m at doesn’t accept packages plus I’ll be moving before replacement could arrive. I checked my next Park and they accept packages. Bull Dog is sending it to next Park.
 

Latest resources

Back
Top Bottom