Question Oil life remaining reset Tiffin Allegro breeze 2014

[Laache]

How to reset "oil life" in the info cluster on dashboard on a Tiffin allegro breeze 2014?

 

[High Desert]

See if this helps: How to reset your 2013 Tiffin Breeze 32BR Oil Service interval Warning - iRV2 Forums

 

[Laache]

Thank you for replying
It is the ”oil life remaining” that needs a reset.
It is an information in the cluster in the dashboard, maybee exklusive for 2014?
It is not mentioned in the instructonsbook at all.
When pressing the ”T” for some seconds, the contrast inverts (like when resetting the trip)
another quick press on T , it starts to blink.
I presume it waits for another input, but I can not find out whitch.

 

[Laache]

Any one that knows the procedure? Now the oil life is below 0%, giving an alert.
I hope someone have a resolution!??

 

[BGMAC]

I know in some older vehicles “like my 2008 Jeep” you would turn the ignition on “not starting the engine” then depress the throttle fully to the floor 3 times within 10 seconds.

 

[MNC]

From another forum
1. Ignition key in ON position (engine OFF)
2. Press and release CRUISE ON. (Move switch to CRUISE ON)
3. Press the CRUISE RESUME switch 4 times (do not hold longer than half a second).
4. Press and hold the CRUISE RESUME switch a fifth time and hold for 3 seconds.
5. "Change Engine Oil" message is reset.

Cycle the ignition key switch and go back to step 2 if the procedure above does not reset the service interval