Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Slide out issues

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web
Ok. Did a little looking until the rain came.
Both controllers are receiving 13.6 volts.

Kitchen slide out. No power to any motor wire. Hall signal, power, ground
Out 1 and 2

Bedroom Slide out had 2 wires that had power.
Hall power and signal wire 12.7 volts
Hall ground and Out 1and 2 - no power.

I swapped the controllers around and got the same results. I am new to the RV life and electrical. The controllers do not display any LED lights until I would accidently touch two wire ends together then it would display the 1 green 9 red. I would reset with press 6 hold 7th manual reset. I retested to same results. At first I thought controllers but now I am thinking a wiring issue. Any help will be appreciated.
 
Update:
Slide outs are fixed! Ended up having a mobile mechanic come and take a look at them. It seems to have eventually been a broken wire behind the main panel underneath the bed. Once wire was fixed and replaced a dead switch BINGO!

Thanks for everyone's input and hopefully this is the last issue with the slides!
 

Latest resources

Back
Top