Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Adhesive to use on window

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web
Thanks all for the responses!
Our original window at about 3-4 months of use literally disappeared on a trip (fortunately no damage experienced). You can imagine our surprise when we stopped LOL! It was changed to a window that pivots from the top. The new window attaches to a rubber membrane (not glass, metal or plastic). Thus the reasoning for using the 3M 08609 I mention above.
What gets me is the glue/adhesive on the current window is actually sticky which leads me to believe it's not epoxy.
Thinking now I should use the 3M tape mentioned by Rich above and due to the positive results with Scott using a tape.
Thanks again for all the suggestions everybody! I really don't want to buy a window (which Lippert advises LOL)
In the fall of 2020 (we picked up the rig in Sept of 19), Newmar also looked at our other windows and determined they were OK.
 
Like what RichW says about using UHW tape. Personally I would etch the bonding surface with Hydrofluoric Acid paste before thinking anything was going to stick to such a nonporous surface.
 

Latest resources

Back
Top