Adjusting water levels in macerator toilet

[Neal]

Doesn’t hurt to always have the water pump on. It will only come on if needed such as when city water pressure is low.

 

[MemoriesByTheMile]

Our macerator is from 2013, so I am not sure if this will apply to newer models. To adjust the water level we press BOTH buttons and hold.
If held just for a few seconds, the flush to empty will occur - we use this when traveling to empty the bowl.
But, if you continue to hold both buttons after it empties, it will start to refill and continue to hold both buttons until you get the water level you want, then release.