deltalawyer
RVF Newbee
- Joined
- Oct 20, 2020
- Messages
- 1
- Location
- Mississippi
- RV Year
- 2005
- RV Make
- Winnebago (Itasca)
- RV Model
- Suncruiser
- RV Length
- 37
Previous owners installed a braking system for their Toad. They don't remember where they had the work done, and they wrecked the Toad a while back. All the paperwork was in the car when they scrapped it. I want to get a system installed, but figure I'll save some expense if I go with the same system they had so that no work needs to be redone to the rv.
They used a Blue Ox tow bar, which I now have. There is a round 4-pin socket at the receiver, and they remember that a blue cable connected from there to the front of the Toad.
Any ideas of where to look on the rv side to see if I can identify what was installed?
They used a Blue Ox tow bar, which I now have. There is a round 4-pin socket at the receiver, and they remember that a blue cable connected from there to the front of the Toad.
Any ideas of where to look on the rv side to see if I can identify what was installed?