Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Best Breakaway System?

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

Jim

RVF Supporter
Joined
Dec 18, 2019
Messages
4,094
Location
North Carolina
RV Year
2016
RV Make
Newmar
RV Model
London Aire 4551
RV Length
45
Chassis
Freightliner
Engine
Cummins / I6 Diesel Pusher 600HP / 1,950 ft-lbs
TOW/TOAD
2016 Jeep Rubicon
Fulltimer
No
I haven't used a breakaway system before, but after watching the runaway Jeep in a previous thread, I've decided to get one. So I have no experience in what to look for. Who is using what, how difficult is it to setup initially, and what was the cost?

TIA
 
@Jim if you're asking about a toad braking system, I personally use the Air Force One. It's not the cheapest of the options but it's the simplest to hook up and disconnect with a system like this and I sure needed it as a newbie RVer getting myself into situations where I had to disconnect, turn around, reconnect. Such a pain lessened by a system like this.

 
I have the Airforce one system in my class B, which is a breeze to hook up. The system itself is a bit spendy, and I also paid someone to install it.

In my other toad, I use the Roadmaster Even Brake which is a portable system that has to be emplaced each time you use it. That can be a bit of a pain in the arse, especially when it is raining. Not great for a person with trashed knees either.

My personal opinion is the AF1 is the best system available.
 
I formerly had AF1. Changed to M&G when I changed toads. It’s a sweet thing! M&G has their own break-away device too.
 
Blue Ox Patriot 3, I hope I never have to find out if the breakaway works...
 
I haven't used a breakaway system before, but after watching the runaway Jeep in a previous thread, I've decided to get one. So I have no experience in what to look for. Who is using what, how difficult is it to setup initially, and what was the cost?

TIA
We have Brake Buddy and have had it for probably 15 years. I have sent it to the manufacturer once to have the compressor rebuilt. It does work well (I test the brake away system periodically) and it's not that difficult to hook up but but to me, it is sloppy. No matter how I adjust the bracket that rests against the seat, it is sloppy. Doing it again, I would rather have a permanently mounted system. I think I paid about $1500. Cdn back then.

Darrell
 
Jim,

I used an Air Force One for 5 years on two coaches with my Raptor. Cost a couple grand professionally installed. It's a very elegantly designed system and, aside from the coiled air and breakaway cables, you'll have NO parts to carry and/or store.

Now, with my '21 Grand Cherokee, I wanted to go a different route since I wasn't completely sure we'd keep it and I didn't want to install the AF1, only to remove it later. So, I grabbed a used Blue Ox Patriot 3 for $400. It's incredibly light, and I can put it in and set it up in 45 seconds. I store it in a Milwaukee bag. I installed the breakaway box at the bumper, and the wire travels through the firewall and is just coiled up under the carpet for whenever I need to plug it into the Patriot.

So, I have 2 versions of a brake/breakaway system; one permanent, and one portable. The biggest advantage to a Patriot, even if bought new, is you don't incur the install costs when you want to change TOADS.

If you're interested, I made a video about my AF1 and Raptor a while back:
 
I have used the M&G Engineering system since 2008 on 4 different toads. When I bought my GMC Canyon, I had M&G install the brake, brake-away, diode brake lights, and Roadmaster baseplate for less than $2500.
 
I have used the M&G Engineering system since 2008 on 4 different toads. When I bought my GMC Canyon, I had M&G install the brake, brake-away, diode brake lights, and Roadmaster baseplate for less than $2500.
Me too!
 
I had M&G and they have a nice break away system but I never got it. I used two very stout safety cables, securely attached to both the jeep and coach, so there was simply no physical way the jeep could get loose.

The only thing that could happen is that if the tow bar failed, the jeep would probably rear end the coach when I stopped, but I always used a good well maintained tow bar too. So after thinking it through and analyzing all the possibilities, I decided not to bother with a break-away system.
 

Latest posts

Latest resources

Back
Top