- Joined
- Jul 27, 2019
- Messages
- 13,206
- Location
- Midlothian, VA
- RV Year
- 2017
- RV Make
- Newmar
- RV Model
- Ventana 4037
- RV Length
- 40' 10"
- Chassis
- Freightliner XCR
- Engine
- Cummins 400 HP
- TOW/TOAD
- 2017 Chevy Colorado
- Fulltimer
- No
In my 2017 Ventana 4037 I have a thermistor in the bedroom above the light switches then just outside the bedroom door across from the refrigerator is the forward zone thermistor. As a result of this close proximity of the two thermistors the bedroom zone (2) temp drastically affects zone 1 to the point I have to keep the bedroom sliding door half closed to shield the bedroom temps from the zone 1 thermistor.
Thermistors need to avoid being on outside walls as you know and do but thermistors for zones need separation. Where would be a better location for the zone 1 thermistor? The televator panel behind the jack knife sofa, under an overhead cabinet, on the side of the dinette cabinets, forward side adjacent to the sofa.
Thermistors need to avoid being on outside walls as you know and do but thermistors for zones need separation. Where would be a better location for the zone 1 thermistor? The televator panel behind the jack knife sofa, under an overhead cabinet, on the side of the dinette cabinets, forward side adjacent to the sofa.