Fish
RVF Expert
- Joined
- Jun 26, 2021
- Messages
- 578
- Location
- Marion IL and Moore Haven FL
- RV Year
- 2007
- RV Make
- Monaco Camelot
- RV Model
- 42PDQ
- RV Length
- 43 ft
- Chassis
- Roadmaster RR10S
- Engine
- Cummins 400 ISL
- TOW/TOAD
- 2010 Ext. Cab Silverado 4x4
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Market timing is everything. Congrats!Montana just left, going down the driveway for the last time.
Delivering truck to the dealer who bought it later today. Got fifth wheel hitch out yesterday and almost broke my back, taking out 60 gallon aux fuel tank here in a minute.
The dealer gave me what I paid for my truck when I bought it new and let me keep the hitch and the fuel tank toolbox. I can get a grand out of them easy I think.
just curious… why?Congratulations. DEF is one of my big worries ?
The generator should have a rocker switch with a lighted side that will flash "codes" at you if the generator has problems. This may help you get it started or save you some money getting it running. Good luck!Splendide 2100 washer/dryer works.
Sanicon works, although I'm displeased that it works off of the chassis batteries.
The electric water heater side of the hydro hot works.
So everything works but the generator and I'll pay to get that going.
Water filter was plugged so I came in and ordered 4, then went hunting for the diversion plug so I could use water. Didn't find it but did find a brand new filter in a cabinet I hadn't looked in yet, along with a whole box of different colors touch up paint and 2 boxes of replacement light bulbs. The only cabinet on the whole coach I guess I hadn't opened.
Giving it a bath now and I'm soaking wet.
I checked the codes a while back and got an error for low cranking speed, code 32.The generator should have a rocker switch with a lighted side that will flash "codes" at you if the generator has problems. This may help you get it started or save you some money getting it running. Good luck!
I read it in the manual.I’ve been following your posts. Informative. Let us know what the problem is with the genny.
How did you determine the sanicon was on chassis batts. Disconnect?