sbtomlinson
RVF Newbee
- Joined
- Jul 29, 2023
- Messages
- 2
- Location
- SW Ontario
- RV Year
- 2008
- RV Make
- Winnebago
- RV Model
- Destination
- RV Length
- 37
- Chassis
- Workhorse
- Engine
- 8.1 Chev
- TOW/TOAD
- not yet
- Fulltimer
- No
Hi Newbe here. We just did our first 3 day camp in our 2008 Winnebago Destination & everything was working great. Plugged into shoreline 30 amp.
2nd day, had a storm roll through. Lightning hit light post very close to the next trailer..knocking out power to the 4-5 trailers in that row.
ours went out too..then returned but felt it was only 1/2 the power. (had no A/c)
We disconnected shore power..after some of the campground hydro breakers were tripped back on... then we re-connected .
Everything seem to be back working even A/C came back on.
Issue is 1) we have no light up in part of our control panel.. showing volts used.
We then thought we should try our Onan 550 generator.. it tries to start.. lots of battery power but sounds like not getting fuel.( lots of fuel)
*Error Code is showing 27
Checked the main breaker panel & switched breakers off & on incase of a tripped breaker.
Like I said thing's are working properly, just No panel read light & Genny won't come back on.
Could this be a Fuse causing these issues?
Any Help is appreciated.
Thanks
2nd day, had a storm roll through. Lightning hit light post very close to the next trailer..knocking out power to the 4-5 trailers in that row.
ours went out too..then returned but felt it was only 1/2 the power. (had no A/c)
We disconnected shore power..after some of the campground hydro breakers were tripped back on... then we re-connected .
Everything seem to be back working even A/C came back on.
Issue is 1) we have no light up in part of our control panel.. showing volts used.
We then thought we should try our Onan 550 generator.. it tries to start.. lots of battery power but sounds like not getting fuel.( lots of fuel)
*Error Code is showing 27
Checked the main breaker panel & switched breakers off & on incase of a tripped breaker.
Like I said thing's are working properly, just No panel read light & Genny won't come back on.
Could this be a Fuse causing these issues?
Any Help is appreciated.
Thanks