Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Dream Internet and Wi-Fi setup for a RV?

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

Neal

Staff member
RVF Administrator
Joined
Jul 27, 2019
Messages
12,416
Location
Midlothian, VA
RV Year
2017
RV Make
Newmar
RV Model
Ventana 4037
RV Length
40' 10"
Chassis
Freightliner XCR
Engine
Cummins 400 HP
TOW/TOAD
2017 Chevy Colorado
Fulltimer
No
In recent chit chat about cellular and wi-fi router options, and not derailing a thread on topic (again), the gears are turning in what would be an ideal dream Internet and Wi-Fi setup in a RV?

Having just upgraded my mother to a new router and going to Wi-Fi 7 and subsequently my own house, I wonder how I would design my dream setup in my RV. Right now I use a Peplink "Pepwave" (I think they're doing away with the Pepwave term) MAX BR1 PRO 5G which is a combination cellular and Wi-Fi router. It has Wi-Fi 6 and has been great to date, I run two of them in the coach which is nice for mixing up Wi-Fi in vs. out, 4 cellular SIM options, and Starlink as another WAN (Internet) source.

My thought is an ideal setup would separate cellular from Wi-Fi. Not required and I did this long ago when I suffered through using a Wi-Fi Ranger and used my own Netgear Wi-Fi routers at that time. I really like Ubiquity UniFi setup and tried it in my house once but I'm not really wired for it. Imagine if Newmar, for example, hardwired your coach so you had a Wi-Fi antenna in the roof of your living room, roof of your bedroom, and one in the basement supporting the patio side of your RV? Have your cellular router and/or Starlink all feeding into a switch (supporting PoE) either of some other brand or UniFi's switch with their OS built in.

It's a bit funny in that a RV is a small space and any Wi-Fi router should provide sufficient range, and the newer Wi-Fi specs (6E/7) will be even better, yet several of us are running mesh or additional access points for whatever reason. Whether the interference in this radioactive coaches, or frames of the vehicle are an issue, seems we need "more power".

Then with the UniFy switch feeding the properly placed antennas we'd have great Wi-Fi coverage. You can feed the UniFy system with cellular and Starlink but controlling the WAN sources would be interesting. That's something I like how Peplink does, it's been a while since I used a UniFi setup to know how to control WAN inputs.

So if designed your dream RV with a dream Internet setup, how would you set it up?
 
Would you include Bluetooth in this dream setup?

I have a couple of Bluetooth speakers build in and they work great without any additional equipment but that's not the case with my TPMS sensors on the toad when I am towing that. I had to mount a Bluetooth repeater back in the chassis battery compartment to reliably get the signal up to my TPMS monitor.

Would the same apply to Bluetooth cameras? Bluetooth has such limited distances, but with the right setup, would we find uses and maybe even better solutions?

Just something else to consider if going down this journey.
 
Bluetooth is typically its own beast and I don't know much about extenders or improving it. The newer implementations such as Bluetooth 5.2 have longer range but that doesn't solve the problems with our ancient tech in RV's. It's really not part of the "Internet" equation but certainly a struggle to deal with connectivity between devices.
 
Then with the UniFy switch feeding the properly placed antennas we'd have great Wi-Fi coverage. You can feed the UniFy system with cellular and Starlink but controlling the WAN sources would be interesting.
Not sure why you need to "control" the WAN sources. The Ubiquity system will, by default, load balance them for you. Or am I missing something?
 
Not sure why you need to "control" the WAN sources. The Ubiquity system will load balance them for you. Or am I missing something?
Managing cellular sims and bandwidth for limited plans. I may not always want Starlink if it’s permanently mounted on the roof. Just want to control the provider for various reasons. I have 3 cellular plans.
 
Managing cellular sims and bandwidth for limited plans. I may not always want Starlink if it’s permanently mounted on the roof. Just want to control the provider for various reasons. I have 3 cellular plans.
Ah, I see what you mean. Well, as simple as it seems, can't you turn off the ones you don't want contributing?

EDIT: I'm sorry Neal. I just got it. Yeah, that is an interesting problem . . .
 
Probably. Just depends what’s feeding the network and if I want to control from my phone or computer. Keeping things simple are always key.
 
I'm sure I'm behind at this point, so let me ask. Given there could be several different Internet sources, are you trying to find an automated method of managing these sources to determine which of them will feed the 2 available WAN inputs on the Ubiquity?

Or should I just call it a night and go feed Ryker?
 

Latest posts

Latest resources

Back
Top