Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Floor replacement advice?

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

mcd244

RVF Newbee
Joined
Mar 9, 2025
Messages
2
I am removing the carpet in our class a motor home and want to install vinyl plank flooring. Any opinions on using this flooring. I installed it in a small travel trailer we had and it worked great but this is a much bigger floor than that. Thanks for the help.
 
It's a shame @MapNerd isn't around any longer (sold his coach) but he did this. Try searching the forum as he posted his install. Did a great job.
 
We replaced the rolled vinyl/carpet on our first mh with the vinyl plank and loved it. If you have damage on the floor you can just replace one plank.
We had a few soft spots I thought might be root, but found out they used foam as support and the foam began to collapse over time. So in those spots we used conventional plywood instead of the wafer board.
 

Attachments

  • IMG_0021.jpeg
    IMG_0021.jpeg
    2.7 MB · Views: 8
  • IMG_0022-compressed.jpeg
    IMG_0022-compressed.jpeg
    860 KB · Views: 8
  • IMG_0047.jpeg
    IMG_0047.jpeg
    2.6 MB · Views: 5
  • IMG_0044.jpeg
    IMG_0044.jpeg
    2.5 MB · Views: 5
  • IMG_0044.jpeg
    IMG_0044.jpeg
    2.5 MB · Views: 6
  • IMG_0045.jpeg
    IMG_0045.jpeg
    2.3 MB · Views: 6
  • IMG_0056.jpeg
    IMG_0056.jpeg
    3.1 MB · Views: 7
We replaced the rolled vinyl/carpet on our first mh with the vinyl plank and loved it. If you have damage on the floor you can just replace one plank.
We had a few soft spots I thought might be root, but found out they used foam as support and the foam began to collapse over time. So in those spots we used conventional plywood instead of the wafer board.
Looks great, thanks for the pictures. I will let you know how it turns out.
 

Latest resources

Back
Top