Question Help! Can’t find replacement trim

[Dtibbs23]

I’ve been trying to find this piece of trim for my Venture RV Sport Trek 5th Wheel. It’s aluminum and black and has offset legs and does not have a vinyl insert on the outside. It has a machined groove for a foam weather strip. I’ve contacted two different Venture dealers and neither has gotten back with me about the trim I need.

 

[Boat Bum]

If you can't find it you might be able to produce it with a 3D printer if you know of one available.

 

[Dtibbs23]

I have a 3D printer but this piece is about 10-12 foot long. I guess i could do it piece by piece.

 

[Boat Bum]

I didn't realize the length.

 

[Dtibbs23]

I didn't realize the length.

All good, I had to cut that piece off after it got damaged.

 

[BGMAC]

What is the trim for and an you give us a couple different angles that are not too close?

 

[Dtibbs23]

Back driver corner trim. This does not have the vinyl insert most exterior trims have.

 

[BGMAC]

If it were me, I’d by a standard aluminum angle trim from a hardware store for however long you need for both sides. Paint it and use butyl tape on the inside to seal it. Then screw it down.