Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Resolved I think I need an exorcism

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

lostinfla

Professional nobody
RVF Supporter
Joined
Dec 19, 2019
Messages
756
RV Year
2016
RV Make
Newmar
RV Model
Dutch Star
RV Length
37
TOW/TOAD
2021 Willys
So, I finally finished the battery change over to lithium, everything in the coach powered up nicely. (While changing over, the coach was unplugged and house batteries removed so everything was powered down.) Now, the entry step lights are on and won't go off. Any ideas?
 
I feel like this is a coincidence…. I would look at the switches on the door…. The door is closed, yes? :)
 
Patio/Entry light switch on?
 
The pins on the door are fine and the patio light isn't on. It's just the LED strips in the stairwell that are on. I cycled the salesman switch (they stayed on) and cycled the switch for the engine batteries as that controls some of the stuff up front like the keyless entry. (bins, not door, which I still haven't figured out why it's wired that way) Isn't this controlled by the Trimark system? I think that box is behind the dash somewhere. Maybe it needs a reboot.
 
My Trimark box is behind the dash. Haven't had to mess with it, but it was there when I took the dash off for another issue.
 
Mistake, I think it's a part of the KIB system.
 
Yup, part of the KIB system with the controller behind the instrument pod. I found it is powered by the chassis batteries but the switch in the battery compartment doesn't kill the power there. I dug the module out, pulled the 12v feed and powered it back up. Happy beyond words to say it's working again!
 
Congrats @lostinfla , I know the feeling.
Thanks Ed, I was beginning to think I had acquired a curse of some sort. Now, to tackle the Oasis, Active Air, shade motors, etc..... :rolleyes:
 

Latest resources

Back
Top