Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Jayco Eagle 319MLOK Cable connection

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

RVThereYet

RVF Regular
Joined
Oct 11, 2023
Messages
70
Location
Ft Worth
RV Year
2023
RV Make
Jayco
RV Model
Eagle 319 MLOK
RV Length
37
Fulltimer
No
Just purchased our 5er and been trying to connect satellite to the connections. I ran the cable direct to the Wally box and all worked ok.
When I hooked up to the cable hook connection, nothing. I did turn off the power to the antenna and checked the wires at both ends and they are connected.
Not sure how to see if the end for the input is in fact the right one on the other end inside the camper or sit they have then switched somewhere hidden.
I guess I'm asking how to do a continuity check on a cable when I can't reach bth ends at the same time. Just trying to insure the signal is getting thru.

Thanks and Happy Thanksgiving!!!!
 
Just purchased our 5er and been trying to connect satellite to the connections. I ran the cable direct to the Wally box and all worked ok.
When I hooked up to the cable hook connection, nothing. I did turn off the power to the antenna and checked the wires at both ends and they are connected.
Not sure how to see if the end for the input is in fact the right one on the other end inside the camper or sit they have then switched somewhere hidden.
I guess I'm asking how to do a continuity check on a cable when I can't reach bth ends at the same time. Just trying to insure the signal is getting thru.

Thanks and Happy Thanksgiving!!!!
Short one end and check continuity on the other
 
Just purchased our 5er and been trying to connect satellite to the connections. I ran the cable direct to the Wally box and all worked ok.
When I hooked up to the cable hook connection, nothing. I did turn off the power to the antenna and checked the wires at both ends and they are connected.
Not sure how to see if the end for the input is in fact the right one on the other end inside the camper or sit they have then switched somewhere hidden.
I guess I'm asking how to do a continuity check on a cable when I can't reach bth ends at the same time. Just trying to insure the signal is getting thru.

Thanks and Happy Thanksgiving!!!!
I have a cable continuity checker. One end would go on the input and the other where you think the other end is. Has a signal and battery power to trace the line. It is two pieces so distance is not an issue.

Something like this but I picked up one at either Home Depot or Harbor Freight.

Sperry Instruments TT64202 Cable Test Plus, Coax & UTP/STP Cable Tester - Detects: Shorts / Miss-wires & Reversals, Wiring Reference Chart Included, 2 Pc. Kit, Yellow & Black Amazon.com
 
Cool! But not sure I want to spend $45 for a one time use. Does Home Depot rent these? Kinda of doubt it.
Thanks for the info anyway.

Merry Christmas!!!!
Love saying that hoping it pisses someone off!!
 
Found the problem. The Satellite cable and the antenna cable connections were reversed by the factory. Reversed and all is good.
 

Latest resources

Back
Top