Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Old Magnum MS2812 and new Lithiums

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web
Yes. I updated it to the advanced head unit…. Well worth it if you are going to stay with the magnum. I think they have a newer one now so check for backward compatibility.
 
Yes. I updated it to the advanced head unit…. Well worth it if you are going to stay with the magnum. I think they have a newer one now so check for backward compatibility.
@Richpatty are you referring to the Magnum remote when you say "advanced head unit"?
 
Yes….upgraded to the ME-ARC50, but that was in 2018 and I think there is a new model for it now.
 
@Richpatty , did you have a particular reason for the upgrade?
 
Yea,…the base unit that came with my Ventana did not support the shunt that provides SOC (state of charge).
 
Actually I just hooked up the wires from the magnum right to the Victron smart shunt in the same way you would hook it up to the Magnum shunt. Although the two shunts report slightly different numbers, they are usually close. Generally I go by what the Victron says as it is easier to check via Bluetooth rather than going to the magnum display up front.

Hope this helps
I can take a pic if needed.
Rich
 
Actually I just hooked up the wires from the magnum right to the Victron smart shunt in the same way you would hook it up to the Magnum shunt. Although the two shunts report slightly different numbers, they are usually close. Generally I go by what the Victron says as it is easier to check via Bluetooth rather than going to the magnum display up front.

Hope this helps
I can take a pic if needed.
Rich
I wired mine in series which seems to be working. Curious what yours looks like if you have a pic of it...
 
Hi. Sorry for the delay…

Here are pics of my Victron Smartshunt with the Magnum wires attached. I also attached a pic of the Magnum collection device which is in the adjacent compartment.

Hope this helps.
Rich
 

Attachments

  • IMG_9470.jpeg
    IMG_9470.jpeg
    1.5 MB · Views: 455
  • IMG_9471.jpeg
    IMG_9471.jpeg
    4 MB · Views: 246

Latest resources

Back
Top