Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Pursue’s Roof Rack and Reinforced Bike Carrier Mods

Welcome to our community

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

jamreno7

RVF Regular
Joined
Oct 2, 2025
Messages
7
Location
Corpus Christi, TX
RV Year
2025
RV Make
InTech
RV Model
Flyer Pursue
RV Length
13'
Chassis
All Aluminum
Engine
None
TOW/TOAD
2017 Toyota Highlander Limited 3.5
Fulltimer
No
IMG_2987.jpeg
 

Attachments

  • IMG_2988.jpeg
    IMG_2988.jpeg
    1.3 MB · Views: 16
  • IMG_2992.jpeg
    IMG_2992.jpeg
    907.9 KB · Views: 14
  • IMG_2990.jpeg
    IMG_2990.jpeg
    1.9 MB · Views: 14
  • 78450794003__7E2FDA63-F88A-4956-BD2E-7DCE7DC6C527.jpeg
    78450794003__7E2FDA63-F88A-4956-BD2E-7DCE7DC6C527.jpeg
    367.8 KB · Views: 18
Nice looking setup, whets the silver bar with the cable on it for? Also what are you storing in the boxes on the roof?
Nice looking setup, whets the silver bar with the cable on it for? Also what are you storing in the boxes on the roof?
[/QUOTED

Nice looking setup, whets the silver bar with the cable on it for? Also what are you storing in the boxes on the roof?
Thank you. The stainless steel bar is my directional tv antenna mast that can be raise and lowered for the road. I have the necessities for the RV in the boxes to keep the excess weight off the tow vehicle. Like tools, air pump, extra 30 amp cord, water hoses and stuff.

Have added more modifications since my original post. Adding two pvc storage pipes underneath the roof racks to store the poles for the awning and other for my fishing poles. Also bolted on rubber pads under the stabilize feet for concrete pads. Had a licensed aluminum welder to reinforce the receiver hitch and added two side stabilizer bar to rest my e-bike rack on top to keep it from rocking during roading.
 

Attachments

  • IMG_3413.jpeg
    IMG_3413.jpeg
    1.9 MB · Views: 0
  • IMG_3414.jpeg
    IMG_3414.jpeg
    2.2 MB · Views: 0
  • IMG_3417.jpeg
    IMG_3417.jpeg
    1.9 MB · Views: 0
  • IMG_3415.jpeg
    IMG_3415.jpeg
    716 KB · Views: 0
I notice your location. That set up would be perfect for PINS, or somewhere along the Laguna Madre. Anyway, great set-up.
 

Latest resources

Back
Top Bottom