Hi, I just installed a CAREUD TPMS system on my 6 tire RV (2 up front and 2 duals in the back). Unfortunately, only one tire is reading on the monitor. If you have any idea what the problem is, please advise. Thank you!
I have never heard of a “CAREUD“ TPMS system, but presume it works similarly to others on the market. Obviously, you are not getting a signal from the sensor to the receiver unit.
The first thing I would check would be the batteries in the sensors. Hopefully, they are replaceable. In most cases, they are and the replacement is usually a small coin-type battery; probably a CR1632. If this TPMS has been on the shelf for a while, the batteries may be dead.
The other thing you might try is to hold the receiver unit very close to each sensor until it recognizes it. Sometimes, that can get things started.
EDIT: After a little research, it appears the sensors use a CR1225 ”button battery.” Looks like CAREUD makes primarily motorcycle TPMS units, but some for cars and RVs as well. Personally, I would return it and go with a more widely-used unit like TST or EezTire.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.