Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

TST 507 transponder

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

Magua

RVF Supporter
Joined
Mar 5, 2021
Messages
136
Location
Texas
RV Year
2014
RV Make
Newmar
RV Model
Essex
RV Length
45 feet
Chassis
Spartan
Engine
500 lSX
TOW/TOAD
2020 Jeep Gladiator Rubicon
Fulltimer
Yes
I’m trying to decide where to put the TST transponder/repeator in my 45 foot coach. Where is everyone else putting theirs? Is it even needed. Some say yes some, some say no. My understanding is that I need it for my toad sensors.
Thanks,
Richard
 
I have a 45 footer and I did need it for the Toad. I put my repeater in the electrical cabinet in the half bath, works great.
 
I have a 38' & do not need it for my toad sensors!
Great system, & quite accurate!
 
We have a 45’ with a twin axle trailer. In our rear bedroom we have a 12v outlet next to the bed so I wired the repeater up to a male 12v connector (got it from Amazon for $8) and whenever we are driving we just pull the repeater out of its storage location, lay it on the bed and plug it in.
Without the repeater we would occasionally see a trailer tire sensor disappear. But with the repeater we never see a sensor disappear.
 
I don't think we have one. I just replaced all the sensors and put them into the triptix and deleted the old. Everything worked perfectly.
 
I needed one to resolve sporadically losing connection to Toad`s rear sensors. Mine is mounted in what would be the washer/dryer closet. Power is from the light in the clothes closet.

Safe travels.
 
My rig is 43ft and I tried it without and it couldn’t pick up the toad at times. I mounted it in the engine area.
 
Thanks for all of the information. I’m looking at putting it in the chassis battery bay. But I like a lot of the other suggestions
 
X2 on the half bath electrical panel cabinet. All kinds of 12v available in there and just screw the repeater to the wall of the cabinet.
 
I bought our TST system at a RV show and I was having a problem with one or two of the sensors being picked up by the control panel. I went back to the show and they offered to come and install them for me after the show. They took all the sensors across the street about 150 feet away and programmed them into the control panel, seems there were too many other TST sensors on coaches around my coach...... They installed the repeater right on one of the chassis batteries (my battery bank is at the rear of coach, curb side), works great.
 
Thanks for all the input. Decided to put it in the electrical cabinet in the 1/2 bath.
Richard
 
Mine is in the generator bay, double-sided taped to the frame and covered with plastic. It is wired directly to the house batteries. Works great on 37 ft class A.
 

Latest resources

Back
Top