Xantrex Link 1000 remote inverter dead panel

[TXfreeze]

I’ve checked manuals and online and haven’t much that helps Recently I noticed the remote control panel to our Xantrex 458 inverter was dead, no power, I checked to make sure the modular phone type cord on the Xantrex 458 inverter was intact and it was as was the 25 amp fuse not popped out I reconnected it I restarted the 458 inverter and it is inverting and charging fine, but the remote panel has not come back on I’ve checked the 2 inline fuses to the battery and all the fuses in the coach panels no problem, I removed the modular Jack from the Remote panel itself and reconnected and nothing. The 12 volt battery is at 13.2 so that’s not the problem. I’m thinking of getting a regular modular phone cord If that’s the same and testing to see if that might be the cause otherwise I guess the panel is fried or possibly something inside the inverter went bad, and that might be the reason the inverter went down?

 

[AbdRahim]

Any codes on the panel on the inverter?

 

[TXfreeze]

Any codes on the panel on the inverter?

Nope totally dead, also tried disconnected the positive cable To the inverter to reset but nothing.

 

[AbdRahim]

Not the remote but on the inverter box itself. You should give Xantrex a call.

 

[TXfreeze]

Not the remote but on the inverter box itself. You should give Xantrex a call.

I don’t see any codes in the inverter, only LEDs and they are working properly, I guess I’ll contact Xantrex and see what they say. Thanks