Question 2026 Super Star 4159 - Trimark Keyless Entry Module Location

[KenK]

I've searched the web, this forum, and Newgle, and can't seem to locate the Trimark keyless entry module and the programming button. I looked in the 2 rear passenger bays per info provided by Newgle's site, and I looked in all the other bays as well. Would anyone know where Newmar would have hid this module?

 

[Neal]

The module is typically found in the dash behind the instrument panel. You could remove the top cover to access it, reset it, etc. But there should be a red column on the lower left of the steering column which is the Admin reset I believe, but I don't know the process. You can try a search of the forum on Trimark for help, or google search, etc. for the manual and info.

 

[KenK]

@Neal...Thanks for the response. The class A's should have the switch on the steering column. The Supers C's (m2-106/112) do not have that switch. I did look though. I downloaded the reset procedures from Newgle and Trimark. Just need to find that darn switch.

 

[DennisT]

On the 22 4160 it is in the last bay passenger side.

Button hanging off a panel with a lot of electrical tape around it. Panel is between the last bay and bay with the slide out tray.

Should be some trimark labeled relay around where the push button reset is as well.

 

[KenK]

@DennisT, Thanks. Looked again in the last 2 bays (pass side). The vacuum is the only thing hanging between those two bays. Check the walls on the forward and aft side of those bays. Lots of wires and other electronic modules. Can not find the push button switch nor any sign of the TriMark module. I sent some feedback to Newgle, will see what they have to say.

 

[DennisT]

Yeah, I know they cleaned this up back there. Mine was a panel to the left of the vacuum.

There was a large panel on the front wall of the slide out bay as well - noted that on the newer ones at the Tampa Super show. Wonder if it is behind that plastic now.

I’d check here in the slide out panel…