Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Basement A/C charging

Welcome to our community

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

RandyPfeifer

RVF Newbee
Joined
Sep 4, 2026
Messages
1
Hi, I’m new to the forum and I hope we have some DIY’ers I can pick their brains.
I have a 2007 Itasca Suncruiser ( just bought in May) and the basement and cab air are both not producing cool enough air. What is the DIY way of charging the basement system and what type of Freon is standard ?
 
Hi, I’m new to the forum and I hope we have some DIY’ers I can pick their brains.
I have a 2007 Itasca Suncruiser ( just bought in May) and the basement and cab air are both not producing cool enough air. What is the DIY way of charging the basement system and what type of Freon is standard ?
Your coach very likely used R134a as the refrigerant. You can purchase recharge kits at most Auto part stores. Follow the directions included with the kit. Your system should have a label listing the type of refrigerant and perhaps even the amount needed. The choices are R12 (long since discontinued) R134a (most likely what you need) and R1234yf (the latest but used much later than 2007).
 
People should be aware that Y1234YF can be directly replaced with R134a. You can buy a gauge set that has the new/altered fittings in use for Y1234YF, or get adapters to use your R134a shop tooling on a vehicle set up for R1234YF.

No need to change the refrigerant oil to go from Y1234YF to R134a, either. If you have to charge a Y1234YF system from empty and your spares stock has a lot of R134a on hand, be aware of the lower expense option for DIY work.
 

Latest resources

Back
Top Bottom