JohninFL
RVF Regular
- Joined
- Jan 21, 2020
- Messages
- 29
- RV Year
- 2019
- RV Make
- Newmar
- RV Model
- Dutch Star 4369
- RV Length
- 43
- TOW/TOAD
- 2015 GMC Canyon
- Fulltimer
- No
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Not sure if this will help you but attached instructions.With my 2019 Dutch Star 4369 I can't seem to get the fresh tank to set full. I can get to the calibration screen but nothing seems to work. What am I missing?
Thanks, I do have this. Currently just moved from a Harvest Host site to full hookups. I have drained the black and grey. Water is I think 65%. Black reads 90%, grey reads 0%, fresh water reads 0%. when in calibration mode I hit empty tank on the black and the section reading empty will turn red as long as I press the section on the panel. The 90% value never changes. I also would like to set the fresh to full but it won't take anything. If I fill the tank to overflowing it will show 5%, so I know that sensor is not dead. Frustrating not knowing what level the tanks are.Not sure if this will help you but attached instructions.
I also went to the pressure sensor for black tank. Everything worked fine for a few months then I lost the calibration, was able to set empty/full levels but intermediate is not accurate. There is a second page to reset RF levels but I am waiting to let Newmar recalibrate that portion at my appointment in September. I can get by with empty and full being accurate.As @NWIP Stated, to calibrate you have to start empty, then fill it. Once full, empty to verify the readings.
Another possibility is your kib sensor strips have come loose from the tank sidewall.
Newmar has done away with the strips and is now installing pressure sensors. I had mine installed in October, and the readout it nearly perfect all the time.