Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

New Basement Gasket

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

Richpatty

RVF Supporter
Joined
Nov 2, 2019
Messages
905
Location
Wesley Chapel, NC
RV Year
2017
RV Make
Newmar
RV Model
Ventana 4310
RV Length
43
Chassis
Freightliner
Engine
400hp
TOW/TOAD
2007 CR-V
Fulltimer
No
Hey all,

I have not seen this mentioned on here (I apologize if I missed it), but did see this mentioned over in the over place... Apparently Newmar has changed the gasket they use on their compartments which is softer and allows you to close your doors without doing the "Newmar Slam". After thinking about this for a while, I decided to spend the money (I am a cheap skate) to help with the closing of the doors...especially with the one under the driver, the pegboard and the two at the back/drivers side (if you have a rear radiator).

I have to say it did help a lot. And I apparently over ordered and/or Newmar sent a bit more than I needed as I have quite a bit left over, so if you are ever in my neck of the woods and want a length to try, let me know and I can sell it cheap. :) I guess I could ship some too...

I also have a bunch of the old gasket from the doors, so if anyone wants that, I can give that away for free! I did use some of the old gasket on the engine compartment and DEF door to keep it from rattling/and closing more soundly. And if you still have lead acid batteries you may be able to add it there as well.

Anyway, I thought I was pass this along.


Rich
 
I think @Dutch Star Don knows the source, but I believe this comes from uni-grip, the same I bought for my battery bay door and still have, unused as SES installed one that seems fine.

This is the one I bought, it's probably NOT the one for the standard basements, but if someone knows the correct part it may be cheaper to buy direct.

 

Latest posts

Latest resources

Back
Top