Question Revisiting the BlackVue DR900S dash cam

[Neal]

In all seriousness, obviously it's personal preference. My preference is out of sight and out of mind. Even when raining it's highly unlikely that it will affect the view that much. I posted a video once on this site of me running over an object and that was with rain. It wasn't that bad. I would not want it mid-window, it's ugly including wire. I didn't care for it at the bottom which is also out of wiper range but also provides less of an overall picture IMHO.

 

[NWIP]

Although not he same unit as yours I mounted mine low in between the wiper blades. I find that when in rain the blades moving thru the viewing area is not very noticeable. I included pic of where I mounted and a screen shot of vieW. Hope it helps.

 

[Neal]

Keep in mind that this camera, at least in my coach is "always on" and therefore serves as a security camera in the CG, other uses while driving. I also have a 2CH BlackVue in the toad with the gadget that allows it to stay on until the voltage gets to a certain level or a timer value, however configured, so my toad is always recording front/back as well, for security.

 

[redbaron]

Keep in mind that this camera, at least in my coach is "always on" and therefore serves as a security camera in the CG, other uses while driving. I also have a 2CH BlackVue in the toad with the gadget that allows it to stay on until the voltage gets to a certain level or a timer value, however configured, so my toad is always recording front/back as well, for security.

Same setup on my coach and toad for same reason.

 

[TJ&LadyDi]

Well, we finally got it done! The BlackVue 900S is mounted just below the tint line on the windshield.

The power cable was run up to and across the top facia plate to the pillar, and down a circuitous path to a new 12VDC socket* I installed alongside the existing J-1939 diagnostic port socket. It was a snug press fit, so I didn't bother securing it with screws. Power came from one of the existing 12VDC sockets in the center console and was run to the new socket with 14AWG red/black Zip cord.

* Amazon.com: Polarlander 12/24V Outlet Marine Boat Caravan Car Cigarette Lighter Splitter Power Socket Adapter Connector: Automotive

The new socket is switched with a L-Series "Dash Cam" rocker switch from the OTR Switch Guys: High quality Carling Technologies custom laser-etched rocker switches, using Carling Technologies L-Series line of rockers and switches

It took a bit of fiddling to get the camera connected to the BlackVue app and the settings where I wanted them. In the end, it all seems to work as advertised.

TJ