Go to the Home Screen on your silverleaf display. On the left-hand side is a list of functional areas - go to the bottom button it will bring you to additional features and settings. push that bottom button. It is below your climate and floors if you have then. The. scroll with the right arrow to the last of the screens and it will have a position to put in the password it will be sent normally to 36 or 37. You need to change it to 42. You will need to do this again every time you reboot the screens, or do a power cycle on the coach with the salesman switch it may reset it.
Be aware there are many many settings on these different special feature screens. Some are good to investigate and some of them will really cause you problems - it is however pretty logical. Give you an example of a problem - I inadvertently set my auto fill to 100% start and 100% stop so the next time I went to auto fill it was coming out the drain tube on the passenger side of the couch. (since every time it would stop it would start again. Oops ). No damage done but I had to figure out what was going on when I saw the water coming out, fortunately it was within a minute or so of it starting to overflow so didn’t waste a lot of water, but there are a lot of settings there that you just have too think about how they work
