Blind spot monitoring not working

[DennisT]

So when you say the "camera system", do you mean the actual cameras or the display?

Was the box where all the cameras connect before going to the display.

Ours is in the overhead above the cab, and appeared to be the same location in the Dutch Star I saw at the mothership.

The ground they connected to was used for other items and moving it to a dedicated ground solved the issues we were having (rebooting on its own, unable to change camera view, static coming through the speakers, etc)

 

[Jim]

Was the box where all the cameras connect before going to the display.

Ours is in the overhead above the cab, and appeared to be the same location in the Dutch Star I saw at the mothership.

The ground they connected to was used for other items and moving it to a dedicated ground solved the issues we were having (rebooting on its own, unable to change camera view, static coming through the speakers, etc)

My rig is a bit older than yours, but I'll check and see what I can find. For some reason, I figured the problem would be somewhere around where the actual turn signal arm goes into the column. But maybe not. I'll see if I can find to box you are talking about.

 

[DennisT]

My rig is a bit older than yours, but I'll check and see what I can find. For some reason, I figured the problem would be somewhere around where the actual turn signal arm goes into the column. But maybe not. I'll see if I can find to box you are talking about.

May be able to call and ask where it is located. I know the Dutch star was above the cockpit area also. Shouldn’t be too far from the head unit since the cameras go there after the box.