Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Problem Ceiling lights flicker when supposedly off

Welcome to our community

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

MarkMaxPayne

RVF Supporter
Joined
May 24, 2023
Messages
305
Location
Beaverton, OR
RV Year
2013
RV Make
Newmar
RV Model
New Aire 3543
RV Length
36'
Chassis
Spartan
TOW/TOAD
Fiat 500 Turbo
Fulltimer
No
My 2023 Newmar New Aire has a multiplex LED lighting system that is controlled by SilverLeaf. My overhead ceiling lights in the living room will have a dim ghost flicker when turned off if there are other lights in the rig that are turned on. They will be off for a minute or two, then pulse on with a very dim glow for about half a second, then turn back off again. Rinse/Repeat. Rather annoying while trying to watch TV with the overhead lights off.

UPDATE: SilverLeaf says this would be an issue in the KIB module Newmar installs as they simply provide commands to it.

Anybody else have this issue? Fixes that seemed to have worked?

Thanks,
-Mark
 
Last edited:
Mine does also, cycling the salesman switch clears it for a few days, mines so faint, you need to be looking to notice
 
My 2023 Newmar New Aire has a multiplex LED lighting system that is controlled by SilverLeaf. My overhead ceiling lights in the living room will have a dim ghost flicker when turned off if there are other lights in the rig that are turned on. They will be off for a minute or two, then pulse on with a very dim glow for about half a second, then turn back off again. Rinse/Repeat. Rather annoying while trying to watch TV with the overhead lights off.

UPDATE: SilverLeaf says this would be an issue in the KIB module Newmar installs as they simply provide commands to it.

Anybody else have this issue? Fixes that seemed to have worked?

Thanks,
-Mark
The key word is multiplexed. And yes it's likely the KIB and the low power requirement of LEDs.
 

Latest posts

Latest resources

Back
Top Bottom