- Joined
- Jul 27, 2019
- Messages
- 13,143
- Location
- Midlothian, VA
- RV Year
- 2017
- RV Make
- Newmar
- RV Model
- Ventana 4037
- RV Length
- 40' 10"
- Chassis
- Freightliner XCR
- Engine
- Cummins 400 HP
- TOW/TOAD
- 2017 Chevy Colorado
- Fulltimer
- No
This morning before departure I got a notification on my iPhone via the Garmin Drive app that there were updates for the RV 890. I had time and a good Internet connection so why not. Both firmware and map updates available. I then departed for the next CG and the GPS was stuck in Calculating mode and constantly trying to recalc. I figured maybe bad GPS signal or interference. I put the route in Waze in my phone which is connected to the dash radio via Apple CarPlay and used that but it doesn't have coach params so I was nervous about using it. I power cycled the GPS multiple times with no luck, it had no clue where it was and was operating horrendously. During my 1:30 drive I tried a couple more update checks and it continued to show an 80 MB update for POI data. It never seemed to update, I figured something in the map data is kaput.
I decided to connect the GPS to my PC and use Garmin Express to update it and sure enough there is a 1.5 GB map update available, hmm, why wasn't that showing via the Wi-Fi updater? So you may want to download and install Garmin Express and connect your Garmin RV GPS to it and see what it shows for updates. I'll know Sunday morning during the next drive if it works or not.
I decided to connect the GPS to my PC and use Garmin Express to update it and sure enough there is a 1.5 GB map update available, hmm, why wasn't that showing via the Wi-Fi updater? So you may want to download and install Garmin Express and connect your Garmin RV GPS to it and see what it shows for updates. I'll know Sunday morning during the next drive if it works or not.