Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

How do I turn the Xcite camera Left\Right Turn signal on

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web
Great info, it talkes about triggers, they would be the input sent from left or right or reverse control activation. Also to be able to hold the rear view It doesn’t indicate a software switch
So as ARD suggested check wires to the turn cameras, next would be to verify the trigger wires from R,L turn switch and Reverse input when shifted in Reverse. This should be at or near the back of the radio unit.
 

Attachments

  • IMG_4985.jpeg
    IMG_4985.jpeg
    1.3 MB · Views: 3
I believe this is the board that controls the cameras for Xcite

IMG_1323.png
 
ARD was talking about connections to the cameras
I was talking about the trigger wires, both should be checked
 

Attachments

  • IMG_4986.jpeg
    IMG_4986.jpeg
    942.7 KB · Views: 8
Example: If you don’t want the camera to come on in reverse you could remove the reverse trigger wire
 
That just seems odd to me to have to pull wires to turn cameras on and off. I have several settings for turning cameras on and off, type of communication, contrast, etc. and it’s 8 yrs old.
 
That just seems odd to me to have to pull wires to turn cameras on and off. I have several settings for turning cameras on and off, type of communication, contrast, etc. and it’s 8 yrs old.
They look at those 3 views as safety so they don’t consider on off
 

Latest posts

Latest resources

Back
Top