Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Need new RV step covers

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

Neal

Staff member
RVF Administrator
Joined
Jul 27, 2019
Messages
11,477
Location
Midlothian, VA
RV Year
2017
RV Make
Newmar
RV Model
Ventana 4037
RV Length
40' 10"
Chassis
Freightliner XCR
Engine
Cummins 400 HP
TOW/TOAD
2017 Chevy Colorado
Fulltimer
No
Looking for recommendations on quality step covers to help wipe feet prior to entry. I think something in the 25 inch width would be ideal as the typical 22 or narrower is too narrow. I have two steps. 25-29 width would be ideal.
 
I know @Neal , you have seen this posted by me before. If you have the Summit SS step covers (can’t imagine that you don’t) then any of the wrap around covers ruin the look. And none of the carpet/outdoor carpet covers have worked for me in the past.
i use these mats cut to fit and just glued down:

https://www.amazon.com/gp/product/B00NOCFSDU/?tag=rvf01-20
7CC6491E-C993-4DBB-9582-F97CAEAED46D.jpeg
 
I have the same covers like J&JD and they do a good job.
 
I don't have the Summit Stainless steps. I'm going to give these Prest-O-Fit ones a try:
@Neal are you considering putting it on both steps or only one?
 
Both steps which is what I have now. I do use a door mat and probably should consider not using these at all. Hmmm
 
@Neal, My only concern was if it would hinder the step retraction but I can't really tell from the pictures.
 
I've been using them since the beginning on both steps, no issues. Had my programmed in 2019 Kwikee step motor failure but that's it.
 
What do you cut the astroturf with and what do you glue it down with?
 
Last edited:

Latest resources

Back
Top