Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

New to Towing a Vehicle

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web
Kevin, I would rather trailer as well for the same reasons. I’m going to look into the frame issue and go from there.
Flat tow seems expensive. If I have to buy a car-hauler, I can use it for more than just towing the Jeep…
 
Your not going to like this, but your RV cannot tow that Jeep Wrangler on a trailer. The Jeep is probably already exceeding the total capacity, or very close. You will need to get it weighed to know for sure. The websites list these are 3900-4500 lbs, but actual weights are closer to 4400-5100lbs.

The trailer required to carry this jeep safely will be a dual axle trailer, 20Ft long. Unless you spend a lot of money on the trailer, it is going to weigh empty about 2000-3000lbs. This means you will need a trailer rated to 9k, since the jeep weighs approx 4.5k.

Once you add the trailer, you are grossly overweight.

Even the lightest trailer, a 7k aluminum with a selling price of $5k weighs 1500lbs. Add the jeep to it at 4500lbs, and you are already overweight.

The only way that jeep will ever safely tow behind the RV is 4 wheels down. And it will be a lot cheaper than buying a trailer, and properly securing it, etc.

The cheapest way to setup your jeep is to add these parts:

* Blue ox base plate
* Brake buddy for braking
* NSA Towbar ( you could even go with integrated braking on the towbar, but the installation is very hard for DIY)
* Supplemental wiring for towing

DIY, all of this will be less than $3k
 
Your not going to like this, but your RV cannot tow that Jeep Wrangler on a trailer. The Jeep is probably already exceeding the total capacity, or very close. You will need to get it weighed to know for sure. The websites list these are 3900-4500 lbs, but actual weights are closer to 4400-5100lbs.

The trailer required to carry this jeep safely will be a dual axle trailer, 20Ft long. Unless you spend a lot of money on the trailer, it is going to weigh empty about 2000-3000lbs. This means you will need a trailer rated to 9k, since the jeep weighs approx 4.5k.

Once you add the trailer, you are grossly overweight.

Even the lightest trailer, a 7k aluminum with a selling price of $5k weighs 1500lbs. Add the jeep to it at 4500lbs, and you are already overweight.

The only way that jeep will ever safely tow behind the RV is 4 wheels down. And it will be a lot cheaper than buying a trailer, and properly securing it, etc.

The cheapest way to setup your jeep is to add these parts:

* Blue ox base plate
* Brake buddy for braking
* NSA Towbar ( you could even go with integrated braking on the towbar, but the installation is very hard for DIY)
* Supplemental wiring for towing

DIY, all of this will be less than $3k. Everything is speculation until he knows his GCWR and weighs his coach and trailer.
Everything is speculation until he knows what his GCWR is and he weighs his coach and toad.
 

Latest resources

Back
Top