Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

paint bubbling on one side

Welcome to our community

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

ynot

RVF Supporter
Joined
Sep 16, 2021
Messages
63
RV Year
2018
RV Make
tiffin
RV Model
32sa open road
RV Length
34
Chassis
ford
Engine
ford
Fulltimer
No
hi
just noticed one side of my rv paint has ripples
no idea why
any suggestions
thanx in advance
 
Need some additional details. How big are they? Can they be deflected when pressing on them? If so, it sounds like delamination that can occur when water has gotten into the area
 
I am going with charger man
water has gotten into the area
Find the leak, could be a water line.
IMG_4687.JPG


Above you can see the water inlet was leaking several times over the 35 year lifespan of my Barth. Better inlets have pressure regulators built in to the inlet.


I installed a new water inlet and put the loop in the hose inlet line so I can change the orings in the water inlet. I can now repair the water inlet from the outside, sliding it out with the loop there. To do this I had to remove the refrigerator. Removing the refirgerator will not be necessary anymore when servicing the water inlet with the loop.


Most common leaks are from the roof.
 
Last edited:
Need some additional details. How big are they? Can they be deflected when pressing on them? If so, it sounds like delamination that can occur when water has gotten into the area
It’s everywhere on the driver side kind of going diagonally you see it when in the sun
Paint look good when I press my hand on the the paint body looks firm but not smooth
 
Kinda sounds like the siding is deflecting from some type of settling/deflection of the framing structure. You see that sometimes on the sides of semi trailers
 
Kinda sounds like the siding is deflecting from some type of settling/deflection of the framing structure. You see that sometimes on the sides of semi trailers
Should I be concerned ?
 
What is the year, make and model?

Has this just recently occurred or has it been this way for some time.
 
What make and model
Is the unit?
 
As Nick mentioned above some pictures would be a big help to clearly understand the issue
 

Latest posts

Latest resources

Back
Top Bottom