Welcome to RVForums.com

  • Register now and join the discussion
  • Friendliest RV Community on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, review campgrounds
  • Get the most out of the RV Lifestyle
  • Invite everyone to RVForums.com and let's have fun
  • Commercial/Vendors welcome

Question purpose of the emergency exit window

Welcome to RVForums.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends and let's have fun
  • Commercial/Vendors welcome
  • Friendliest RV community on the web

sheridany

RVF Supporter
Joined
Nov 14, 2019
Messages
2,314
Location
Orinda, CA
RV Year
2023
RV Make
Prevost
RV Model
Marathon #1361
RV Length
45
Chassis
Prevost
Engine
Volvo D13
TOW/TOAD
2023 Jeep Grand Cherokee
Fulltimer
No
I am replacing my emergency exit window in the bedroom. Have you ever looked at the window and wonder if you could fit in the window and get out of the coach in a emergency situation? We removed the window yesterday, and it dawned on me, there is no way I would fit my large body into that small opening trying to get out. I am sure it is required by law, but if it won't work for some percentage of RV owners, why not make it bigger so one could fit through the opening? I am grateful for the egress door in the rear bath as my escape option in an emergency.
 
This is why Newmar did a wonderful thing in adding the egress door in the bathroom. I hope every manufacturer follows suit.
 
Exactly right, @Neal! The emergency egress door is absolutely essential in a motorhome; at least in a motorhome that I own and use! That said, adrenaline is a fantastic motivator for getting out of an exit window. :ROFLMAO:

TJ
 
I figure I could fit thru a keyhole if my life depended on it. ;)
 
If one owns a gasser, I guess one has to be lean.
 
I keep my Stihl chainsaw gassed up under the bed for just this reason.
I don't know if your serious or just kidding, but that's not a bad idea. I've often considered my options if there was a fire between the bedroom and the door up front. And these gas refrigerators are known for being dangerous.

I'm not thrilled with the idea of having to get my wife out the emergency window and then toss out a couple of German Shepherds behind her. And do this while in the dark, breathing burning plastic generated smoke, and fighting ever growing anxiety. I'd say my chances of success are on the lower side.

You guys with an exit door in the bathroom have a shot at it but I'm pretty sure that me, being in the back of a burning tube with realistically no way our, would be in serious trouble.
 
I don't know if your serious or just kidding, but that's not a bad idea...

I was not serious and I didn’t meant to make light of your concern. Apologies if I caused any offense.

They say you can either laugh or cry in tough situations. I’m definitely a laugher and always have been. Just how I cope.

in all seriousness, if you’re that concerned about it I’d first think about the following alternatives:
1. Ask newmar to price out installing an emergency egress door for you. They might be willing to do it.
2. Ask Newmar to price out increasing the size of that window if there is room for a bigger one that would work but it’s just too small currently.
3. A chainsaw would be a last resort imo. I’m not sure how well it would work but it’s better than nothing. My biggest concern would be in a moment of panic, waving it around frantically and causing an injury or death, racking you with guilt for the rest of your life if you made it out.

If Newmar says no to the first two options, I’d ask a custom card shop. I’m sure many could do it.
 
@MapNerd, I'm just 3rd party here but I don't think he or anyone took offense to your humor but instead took it as not a bad idea. Don't sweat it my friend, I think you're reading too far into it, your post was good.

P.S. Read his info on the left side, he's driving a Tiffin, doubt Newmar will help :) You seem deprived of :coffee: lately

Now why not use what some fighter jets use on the canopies to blow them apart prior to ejection. You could have some of that cool detonating ribbon stuff in just the right place.
 
Ribbons that say “Remove before sleeping”?
 
@MapNerd, I'm just 3rd party here but I don't think he or anyone took offense to your humor but instead took it as not a bad idea. Don't sweat it my friend, I think you're reading too far into it, your post was good.

P.S. Read his info on the left side, he's driving a Tiffin, doubt Newmar will help :) You seem deprived of :coffee: lately

Now why not use what some fighter jets use on the canopies to blow them apart prior to ejection. You could have some of that cool detonating ribbon stuff in just the right place.
I did pull an all-nighter Troubleshooting a platform upgrade last night. Went to bed at 6am, back up at 11.

Now that would be something if Newmar was willing to install an emergency egress door on any class A!
Still, check with third parties would be my immediate advice. Someone can do it...for the right price.
And if the price ain’t right, go for the 14” Stihl. You want something nice and compact that is easy to maneuver in tight spots.

Make sure you give it a good test each night just as DW settles into bed so that she can have reassurances.
 
I was not serious and I didn’t meant to make light of your concern. Apologies if I caused any offense.
Oh lord man, I took no offense. In fact, I was laughing when I first read it and then thought... wait, maybe . . . :)

So here's where we are so far. I took my Jonsered chainsaw and cut a reasonable sized access hole in the side of the coach. I no longer have a dinette but we didn't use it all that much anyway. Nailed some plywood over the hole and painted the inside of the plywood to match the interior of the coach. I'm pretty sure that one good kick will knock the plywood off, and then out we go!

Working on attaching a slide to the side now.
 
Oh lord man, I took no offense. In fact, I was laughing when I first read it and then thought... wait, maybe . . . :)

So here's where we are so far. I took my Jonsered chainsaw and cut a reasonable sized access hole in the side of the coach. I no longer have a dinette but we didn't use it all that much anyway. Nailed some plywood over the hole and painted the inside of the plywood to match the interior of the coach. I'm pretty sure that one good kick will knock the plywood off, and then out we go!

Working on attaching a slide to the side now.
tuck and roll, baby!
 

Latest resources

Back
Top