Question Replacing a washing machine in a Newmar Class A motorhome

[GlampDaddy]

Your options are now 1) start shopping for your new Splendide, or 2) start shopping for your new coach!

 

[Texas Clodhopper]

Your options are now 1) start shopping for your new Splendide, or 2) start shopping for your new coach!

I am confident you're not talking to me or are you? If you are, STOP! Yep, that was yelling at you.

 

[GlampDaddy]

I am confident you're not talking to me or are you? If you are, STOP! Yep, that was yelling at you.

DUDE!! I’m not the one locking your washer door. Go yell at the guilty party !!

 

[Neal]

Try replacing the door lock. Not hard, easy to find. Part number is ERW10192995

 

[Texas Clodhopper]

Try replacing the door lock. Not hard, easy to find. Part number is ERW10192995

Thanks, it sounds better than what @GlampDaddy suggested about buying a new coach.

 

[Roadglide117]

my washer had that problem that wouldn't spin dry clothes...then I found error code..meant door not latched...cleaned all around door latch...closed door hard..without slamming and has worked every time since..that was a year ago

 

[Neal]

Doing bedding today and got the A.10 code, thanks @Jim. But it just means check the filter, so using a kitchen knife pop the bottom cover panel off, pull the filter out of the lower right, rinse it and proceed with laundry. Not surprised as doing bedding typically produces a labrador puppy. Not a big deal to fix.

 

[team bradfield]

Did mine yesterday, small German shedder in there. Did the clean cycle per instructions, wife happy

 

[Neal]

So I've been battling my washing machine for the past 1-2 hours. The cause? ME!

I crammed a comforter in that I know really won't clean but I tried. The problem is it ripped open during the wash so some of the stuffing came out. I didn't realize it traveled down to the drain plug. The issue I had was so much water was still in the washer I didn't know how to get it drained as the drain tub isn't enough capacity for that amount of water. I had an idea...cut the bottom of a solo cup out and hold it up to the drain and divert it into my biggest pot. That worked, I got the water out, I still ended up filling the drain pan but that's soaking up into a towel now. Now that I got the drain plug out you can see what was in it. This is what causes the A 10 error code and in no way requires replacing the washer/dryer. You just have to know how to use and clean these things. As soon as I pulled this out the machine started spinning again and is happy. There is an occasion where the machine may need to be opened up to pull something out of the drain tube per online. Socks etc. have found there way out. In the picture below, that white 4 pronged thing spins. If it doesn't spin because of a clog you get the A 10 error code.