Starlink

[sheridany]

One thing 5g support wanted me to do in the beta release is check the ignore obstruction outages feature they added.

Added an “Ignore ObstructionOutages” option in the Starlink WAN

I am not big on updating firmware that is not GA. I have been burned badly before. But if our commander sys admin says I have to do it, then.

 

[Neal]

I've used the beta's before, wasn't a big deal but I don't think you need to go down that path. I don't know how Pepwave can determine a SL obstruction outage.

Just realize if you disable health checks then you are preventing failover such as to a cellular backup. For example if you have WAN (SL) in Priority 1 and Cellular in Priority 2.

Now if you get fancy someday and use SpeedFusion Hub like some of us are using then you can put both in SpeedFusion and never know one failed or was degraded. But if you don't have unlimited cellular it's not recommended as you're sending everything up both paths all the time and eating bandwidth.

Just have to understand what you're doing and also give SL some time. It's not going to be perfect at every location just like SAT TV. Good to have your backup options and understand how it all plays in your Internet game.

 

[sheridany]

I agree. SL is definitely a game changer and since we got SL it’s been very good compared to just cellular as I have the paddle antennas and sometimes it wasn’t great. We are running our companies from the road and this has gone much better than before so we are good for the moment.

 

[GUS2000]

we installed the high performance dish a few months ago and do not use a Starlink router... since day one our connection has been solid and im sure we are on an older pepwave firmware... when we get on the road this weekend i will check and see what version we are on...

 

[sheridany]

The 8.5 firmware for pepwave is now available.

 

[Neal]

The 8.5 firmware for pepwave is now available.

Let us know if you see any difference with Starlink operations.

 

[Neal]

My two pepwave's and fusionhub's are updated to 8.5. I had to hunt down the Starlink settings and finally found it. Click Network at the top, WAN on the left then the red edit pencil/box on the right of Starlink at the bottom.

 

[sheridany]

A while back when I chatted with the 5g store, they had sent me this. FWIW

https://5gstore.com/download/Starlink_Guide_1.3.pdf

 

[Joe Dutchstar]

Typically I connect directly to the Starlink router. Here in Fiesta Key ( middle of nowhere) speeds at 11 am Wednesday are decent with low latency

 

[Texas Clodhopper]

For some reason, Starlink shows my location as Dallas, even though I'm in San Antonio. I haven't found how or if I can change this. Any ideas from you learned individuals?

 

[NWIP]

When you ordered was the shipping address Dallas?

 

[Texas Clodhopper]

When you ordered was the shipping address Dallas?

I bought it at Best Buy, Pueblo, CO while traveling so there wasn't a shipping address only my billing address which is San Antonio.

 

[NWIP]

Where are you seeing location? On the app?

 

[Neal]

For some reason, Starlink shows my location as Dallas, even though I'm in San Antonio. I haven't found how or if I can change this. Any ideas from you learned individuals?

Do you happen to have a tag tied to your shoe lace?

 

[Kevin D Pem]

For some reason, Starlink shows my location as Dallas, even though I'm in San Antonio. I haven't found how or if I can change this. Any ideas from you learned individuals?

When I was using it my location came up as LA, Cali. I was in AZ!
My personal reasoning was the entry point to the net for starlink was in LA.
So if you want to have everyone know your at home try turning on your device's GPS.